No plug on my original Black toner cart. 2400W

nimnorf2 · Joined: 21 May 2006 Posts: 1

I ordered a refill kit from Meritline. The instructions say that there is a plug on one of the sides of the OEM cartridge. Not on this one. At least I can't find it. This is the starter cartridge that came with the printer. It's a Konica/Minolta Magicolor 2400W. There is a sliding door that exposes a 3/8 of a square inch hole on the cartridge. Is this the waste door or is it possible that this is where I should put the toner refill?

inkgirl · Joined: 18 Aug 2005 Posts: 393

Hello,

Typically starter cartridges are not made in the same fashion as a regular replacement cartridge. The materials used, the amount of toner and the actual design of the cartridge is substandard to the regular cartridges.

The sliding door will not access the toner hopper in order to refill the cartridge.

It is better to put a hole in the spot indicated by the instructions and use heavy duty duct tape to seal the hole.

Thank you