magicolor2400w

dfdfafde · Guest

I found the plug and got it out and the cartridge filled, but the printer still says that the yellow cartridge is low. How do I reset it?

Bob

inkgirl · Joined: 18 Aug 2005 Posts: 393

Hello,

RESET PROCEDURE FOR QMS MAGICOLOR 2400 SERIES PRINTERS

The following reset procedure will enable the printer to continue printing even though the toner level will say “empty”.

Magicolor 2400 Series

STEP 1
You need to find the STATUS DISPLAY icon for your QMS 2400 printer. To locate this icon, go to START  PROGRAMS  KONICA MINOLTA 2400 UTILITIES  and then select “STATUS”.

STEP 2
In the menu bar on top, select “PRINTER” and then select “MODE SETTING”.

STEP 3
Uncheck the selection “AUTO TONER REPLACE” and then save or click OK.

STEP 4
Now turn your printer off, and then turn it back on a few seconds later.

That’s it!

Watchwait · Joined: 02 Jun 2006 Posts: 1

I saw a post earlier where you gave instructions on using the printer utilities to turn off the low toner warnings on a Konica 2400 printer. I tried this on my 2430DL and the status tab did not contain a "turn off warning" option. My cartridges are all full, but now I am unable to print anything! Please advise ASAP.

Thanks

Steve Sidwell

ssidwell@charter.net