Samsung ML-1710

inkgirl · Joined: 18 Aug 2005 Posts: 393

Hello,

Locate the plug on the outside of the toner cartridge.

Using a flathead screwdriver, remove the plug by inserting the screwdriver between the plug and the hole on side of the cartridge. Using the side of the cartridge as support, pop the plug up and out of the cartridge.

When you finish refilling the cartridge, reinsert the plug into the hole and push it down firmly until it snaps into place and sits flush against the side of the toner hopper. Turn the cartridge over. plug side down to make certain no toner escapes from the plug ( if it does, use a small piece of duct tape to repair the leak).

mathewdavid · Joined: 17 Aug 2009 Posts: 8 Location: canada

You can use toner funnel and plug as a toner refill tool.
So,please search about it.