HP Mono Laster Printer Recommendations

average_male · Joined: 07 Jun 2010 Posts: 2

Hello,

Was hoping for a recommendations for a B/W laster printer. Here are my requirments not listed in priority:

1) HP Brand
2) Toner and Drum in a single cartridge
3) Cheap to refill/maintain
4) Has dark toner transfer, as I will be using it to print/transfer toner to PCB
5) decent sharpness in print quality, as PCB trace lines should be thin yet dark

Speed or warm up time is not an issue.

intial research indicated an HP 1100, but not sure if that meets the requirments above.

Thanks,
Moe

Junior · Professional Support Joined: 07 Jul 2009 Posts: 37

I recommend that you look at the refill kits to see what best fits you. Generally recommending a printer can be something of someones preference. So getting to know the type of printer you need, or functions you need from it, is something I would leave up to the sales person at HP.

If you have your eye on a few, try looking online to see what the cost of the refill kits go for. Generally speaking, monochrome refill kits are usually cheaper than color refill kits.

average_male · Joined: 07 Jun 2010 Posts: 2

I gave my requirements above, and that is what I am looking for.