Instructions for CLP-315

John Galt · Joined: 28 Aug 2009 Posts: 1

Please provide instructions for refilling Samsung CLP-315 cartridges. The instructions I received with my refill kits are for the CLP-300, a very different cartridge. I see other messages saying "burning thru the top is the best way to get inside", but I would like better instructions than that. Exactly where on the top should I burn the hole? Thanks...

emergency · Joined: 13 Sep 2009 Posts: 1

Apparently, Uni-Kit just added a page to their instructions for our printer. However, it is not available for download from their website as yet. You do not have to burn a hole through the cartridge. The refill hole is on the left side of the cartride. There is already a plug that can be replaced. You will have to make a paper funnel because the refill hole is smaller than the nozzle on the toner refill bottle. Also, the instructions say to fill using only half of the bottle. After I filled the cartridge with half I could not even see the toner in the cartridge, so I used the whole bottle. I'll see if that was a no no. So far so good. Do not expect your software to indicate that the toner level is increased. I think those chips only can measure one direction. If there is a way that I can send the pdf of the instructions that they sent me, let me know.

dustingold09 · Joined: 13 Sep 2009 Posts: 7 Location: Canada

Hello,

you need a cartridge chips for reset counter before refilling process.
For more detailed instruction should check out the link given below.

Laser Printer